Internal Storage Calibration Data Digital DO Sensor For Various Water Detecting
DRFN Dissolved oxygen comes with cleaning interface, For the dissolved oxygen of the optical method, a fluorescent cap needs to be replaced every 1 to 2 years, and we recommend replacing it every year. The user can also decide whether to extend the replacement time according to the actual situation.
Specification:
| Product Name | DO sensor |
| Product Model | OPD700-YD01A |
| Brand Name | Daruifuno |
| Measuring Range | Oxygen content: 0.00~20.00 mg/L saturation: |
| Signal Type | Digital |
| Resolution | 0.01mg/L 1% |
| Accuracy | 0.1 mg/L 1% |
| Response Time | T90 less than 60s |
| Temperature compensation | Automatic, built-in temperature unit |
| Calibration Method | Zero position/slope/de |
| Work Pressu | 0~3Bar |
| Operating Temperatu | 0.0~50.0℃ |
| Material | ABS |
| Dimensions | Diameter: 35mm Total length: 260mm |
| Installation Size | 1"NPT at both ends of the installation thread; insertion depth 100 (including cleaning plug 1 |
| Protection Grad | IP68 |
| Weight | 170g |
Please click the user manual of DO sensor here:
OPD79 dissolved oxygen user manual.pdf
Brief introduction:
● Fluorescence principle
● The digital sensor is conducive to long-distance signal transmission without serious
signal attenuation
● No calibration required, can meet the requirements of field work, short-term or
long-term operations
● Without consuming oxygen, accurate measurement can be achieved when oxygen
concentration is low
● All-in-one package, can be used with the online transmitters, DTU, and portable
instruments
● RS485 interface, Modbus RTU, support access to standard industrial control system
● The protection grade is IP68, can work continuously and stably under water for a long
time
● Internal storage of calibration data, support offline calibration, plug and play on site
Aplication:
◇ Sewage
◇ Surface water monitoring
◇ Aquaculture water bodies
◇ Urban sewage treatment
◇ Industrial wastewater treatment
◇ Aquarium
FAQ
1. What is the measuring principle of this dissolved oxygen sensor?
A: This dissolved oxygen sensor uses the fluorescence method, covering the detection head with a layer of fluorescent material, and the LED light source in the sensor emits blue light to the head.The fluorescent substance on the surface emits red light when the fluorescent substance is excited. The higher the dissolved oxygen concentration, the shorter the time from emitting blue light to red light. Use red light release timeThe phototropism between the concentration of dissolved oxygen and the concentration of dissolved oxygen, the sensor calculates the concentration of dissolved oxygen in the medium.
2. What is the advantage of digital dissolved oxygen sensor?
A: The digital DO sensor is conducive to long-distance signal transmission without serious signal attenuation. The sensor has RS485 interface, standard Modbus RTU communication protocol.
3. Can the DO sensor work under water?
A: Certainly. The protection grade of the dissolved oxygen sensor is IP68, it can work under water for a long time.
4. How long has the fluorescence technology been in use?
Fluorescence technology used to detect oxygen uptake in the medical industry for decades.
In the early 2000s, the technology was adapted for use in measuring dissolved oxygen in biological reactors.
The key issues in making the technology viable in the water treatment industry were the durability of the sensing element and cost.
Another important concern was packaging the system in a way that was easy to use and required very little maintenance.
5. What is the wire length of the DO electrode?
A: The lead wire of this electrode is 1 m by default, other lengths need to be customized, contact our customer service, the price will vary with the change of length.
Product Tags:
|
|
Internal Storage Calibration Data Digital DO Sensor For Various Water Detecting Images
|
