Digital ±2000mV ORP Sensor For Water Treatment And Industrial Process Monitoring
ORP digital sensor, with digital interface (RS485*1), can be used to measure the change of ORP value in aqueous solution system within the range. It has standard RS485 Modbus RTU protocol interface function, and can communicate with the host computer remotely.
Specification:
| Product Name | PH sensor electrode |
| Product Model | DRH700-YD01A |
| Brand Name | Daruifuno |
| Electrical Isolation | Without |
| Signal Type | Digital(RS485 interface) |
| Measuring Range | ORP: ±2000mV TEMP: 0~50℃ |
| Resolution | 1mV/0.1℃ |
| Accuracy | ±2mV |
| Temperature Compensation | Automatic, built-in temperature unit |
| Calibration Method | Zero position/slope/deviation |
| Work Pressure | 0~2Bar |
| Operating Temperature | 0.0~50.0℃ |
| Shell Material | ABS |
| Dimension | Diameter: 35mm Total length: 260 mm ( include cleaning cover) |
| Installation Size | 1"NPT at both ends of the installation thread;
insertion depth 100 (including cleaning plug 115) |
| Protection Grade | IP68 |
Please click the user manual of RS485 ORP sensor here:
DRH79 User Manual.pdf
Features＆ Advantages
● All-in-one package, can be used with the online transmitters, DTU, and portable instruments
● RS485 interface, Modbus RTU, support access to standard industrial control system
● The protection grade is IP68, can work continuously and stably under water for a long time
● Internal storage of calibration data, support offline calibration, plug and play on site
Aplication:
Water treatment monitoring
Drinking water,surface water,water quality analyze,ground water,ect.
Industrial process monitoring and dosing control
Chemical,petroleum,paper,food and medicine,PCB manufacturing,etc.
FAQ
1. What is the wire length of the ORP electrode?
A: The lead wire of this electrode is 1 m by default, other lengths need to be customized, contact our customer service, the price will vary with the change of length.
2.Does ORP measurement require temperature compensation?
A: ORP measurement is not temperature controlled, so the ORP sensor does not require temperature compensation.
3. How do we choose the ORP electrode when the oxidation level is high?
A: In occasions where the oxidation level is high, that is, the ORP value is high, platinum electrodes are recommended, otherwise gold electrodes are recommended. ORP measurements usually use the above two inert materials as indicator electrodes.
4. What should ORP electrodes be used with?
A: ORP electrode cannot be used alone, it must be connected with PH/ORP controller. We have a matching controller with a suitable price, and you can choose.
Product Tags:
|
|
Digital ±2000mV ORP Sensor For Water Treatment And Industrial Process Monitoring Images
|
